Insignia NS-WBRDVD2, NS-WBRDVD2-CA 11

Wireless Blu-ray Disc Player

Using a wired network provides the best	7	Press	or	to select Network, then press
performance, because the attached devices		ENTER.
connect directly to the network and are not	8	Press	or	to select Wired, then press ENTER.
subject to radio frequency interference.	8	Press	or	to select Wired, then press ENTER.
subject to radio frequency interference.		The IP Settings screen opens.
		The IP Settings screen opens.

Notes

•When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

•Do not connect a modular phone cable to the LAN port.

•Since there are various connection configurations, follow the specifications of your telecommunication carrier or Internet service provider.

2Press ENTER. The Settings menu opens.

IP Settings
Link Status	Link Down
MAC Address	00:22:84:04:96:f1
IP Mode	Dynamic
IP Address	0.0.0.0
Subnet Mask	0.0.0.0
Gateway	0.0.0.0
Primary DNS	0.0.0.0
Secondary DNS	0.0.0.0

3Press or to select Network, then press

ENTER.

4Press or to select Wired, then press ENTER. The IP Settings screen opens. If the network connection is active, Link Up appears next to Link Status. If the network connection is not active, Link Down appears next to Link Status.

	IP Settings
Link Status			Link Down
MAC Address			00:22:84:04:96:f1
IP Mode			Dynamic
IP Address		0.0.0.0
Subnet Mask		0.0.0.0
Gateway		0.0.0.0
Primary DNS		0.0.0.0
Secondary DNS		0.0.0.0


	Apply		Cancel

Apply Cancel

9Press or to select IP Mode, then press

ENTER.

10Press or to select an IP mode. You can select:

•Dynamic—Uses DHCP to automatically obtain an IP address.

•Manual—Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings. If you select Manual, the following screen opens. Enter the IP information here.

Please enter new IP Address

Valid range of each segment is 0 to 255

Current value

111.11.11.11

New Value

OK Cancel

•Off—Disables the network interface. 11 Press to go to the previous menu.

To make changes to your network connection, see “Changing the Network settings” on page 19.

5Press to go to the previous menu.

6Press ENTER. The Settings menu opens.