Problem
Cannot change the viewing angle
Resume function does not work
Solution
•Some discs are not recorded with multiple viewing angles. Check the documentation that came with the disc.
•Not all scenes on a disc have multiple viewing angles. Check the documentation that came with the disc.
•If you press (stop) twice, the resume information is erased.
•Some discs do not support the resume function.
| Audio performance (frequency | DVD (linear audio): |
| response) | • 4 Hz to 22 kHz (48 kHz sampling) |
|
| • 4 Hz to 44 kHz (96 kHz sampling) |
|
| |
|
| S/N ratio: 90 dB |
|
| Dynamic range: 80 dB |
|
| Total harmonic distortion: 0.004% |
|
|
|
| HDMI output | Output format: 480i, 480p, 720p,1080i, 1080p |
|
| Output Connector: Type A (19 pin) |
General |
| |
|
|
|
| Power | |
| Power consumption | 15 W |
|
|
|
| Dimensions | 16.93 × 9.06 × 1.50 inches |
| L × W × H | (430 × 230 × 38 mm) |
|
|
|
| Weight | 4.74 lbs. (2.15 kg) |
•The Insignia player only supports the connection of USB memory in order to fulfill the
•You must have a
•Some
•You will occasionally need to delete the contents in storage in order to free up space. This can be done from your player’s main setup menu, in the System submenu (Select Clear BD storage). The Insignia player currently only allows deleting the entire BD storage.
•No clock is used to manage the expiration of downloaded
Specifications
Specifications are subject to change without notice.
System and outputs
Media | |
| |
|
|
TV signal system | NTSC |
|
|
Video output | Electric level output: 1.0 |
| Resistance: 75 ohms |
| Output connector: Pin jack (1 system) |
|
|
Component video (Y, CB,CR) | Y output level: 1.0 |
| PB output level: 0.7 |
| PR output level: 0.7 |
| Output connector: Pin jack (Y: green, PB: blue, |
| PR: red)(1 set) |
| Output format: 480i, 480p, 720p, 1080i |
|
|
Audio output (analog) | Output level: 2 Vrms (1 kHz, 0 dB) |
| Output connector: Pin jack |
| Number of connectors: |
|
|
Audio output (digital) | Optical digital output (1) |
| Coaxial digital output (pin jack) (1) |
Operating temperature | 41°F to 95°F (5°C to 35°C) |
Operating humidity | 10% to 80% |
Video file requirement (USB/DISC)
Video file compatibility with your player is limited as follows:
•Maximum resolution size: 1920x1080 (W x H) pixels
•File extensions: .wmv, .avi, .mp4, .mpeg (Note: Files encoded by Divx cannot be played on this player)
•Playable Audio format: Dolby Digital , DTS , MP3 , WMA , AAC , AC3
•Sampling frequency: within 32 to 48kHz (WMA), within
•Bit rate: within
•
•Maximum Files/Folder: Less than 2000. The movie file name and subtitle are limited to 180 characters.
•Not all of the WMA and AAC Audio formats are compatible with your player.
•HD WMA movie files contained on a USB 1.0/1.1 flash drive may not play correctly.
•Your player does not support files that are recorded with GMC (Global Motion Compensation) or Qpel (Quarter pixel). Those are video encoding techniques in MPEG4 standard, like DivX or XVID.
MP3/WMA audio file requirement (USB/DISC)
•File extensions: .mp3, .wma
•Sampling frequency: Within 8 to 48kHz (WMA), within 11 to 48kHz (Mp3)
•Bit rate: Within
•
ISO 9660+JOLIET, UDF and UDF Bridge format
•Maximum Files/Folder: Less than 2000 (total number of files and folders)
•Depending on the size and number of the MP3/WMA files, it may take several minutes to read the contents of the media.
26 | www.insigniaproducts.com |