Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

cable), a compatible audio signal is automatically sent over the HDMI and optical or coaxial connections. With this setting, Blu-ray audio is limited to the soundtrack for the main movie (no PIP audio).

•Bitstream Legacy—Sends a DTS or Dolby Digital bitstream from the disc over the HDMI and optical or coaxial connections. Blu-ray audio is limited to the soundtrack for the main movie (no PIP audio).

•Bitstream mixed—Sends a mixed (PIP audio and movie audio) DTS audio stream over the HDMI and coaxial or optical connections. This mode is primarily intended for use when you want to hear both PIP audio and the movie audio.

5Press to go to the previous menu.

Turning dynamic range control on or off

Dynamic range control is only active when a Dolby Digital signal is detected.

When Dynamic Range Control is set to Off, movie soundtracks are played with the standard dynamic range.

When movie soundtracks are played at low volume or from smaller speakers, you can set Dynamic Range Control to On. Your player applies appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

To turn dynamic range control on or off:

1Press or to select Settings, then press ENTER. The Settings menu opens.

2Press or to select Audio, then press ENTER. The Audio menu opens.

3Press or to select Dynamic Range Control, then press ENTER.

4Press or to select On, Off, or Auto, then press ENTER.

5Press to go to the previous menu.

www.insigniaproducts.com37