Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

Resetting your player

To reset your player:

•To reset all settings (include parental control settings) to the factory default, select one of the following options in the System menu:

•Restore factory settings and deactivate all connected applications

•Restore factory settings

•Deactivate all connected applications

•Deactivate Netflix

•Deactivate Pandora

•Deactivate CinameNow

Power

Problem

No power

The player switches to standby mode

Solution

Make sure that the power cord is plugged into a power outlet and that the outlet is supplying power.

After a period of inactivity, your player switches to standby mode automatically. This is a power saving feature.

If your player switches to standby mode unexpectedly, a safety device may have been activated. Press STANDBY/ON on the front of your player.

Operation

Problem

Remote control does not work

Some or all functions do not work

Solution

•Make sure that you are pointing the remote control at the remote control sensor on the front of your player.

•Make sure that there are no obstructions between the remote control and the remote control sensor on the front of your player.

•Make sure that there is no colored glass between the remote control and the remote control sensor on the front of your player. Colored glass, such as the glass door of an entertainment center, can interfere with signal reception.

•Make sure that the remote control sensor is not exposed to direct sunlight or bright light. These can interfere with signal reception.

•Replace the batteries.

•Some functions are not allowed by the disc, for example, fast-forwarding through the warning information at the beginning of the disc.

•Condensation may have formed inside your player. Turn off your player and wait one to two hours for the condensation to evaporate.

•Reset your player. For instructions, see “Resetting your player” on page 55.

www.insigniaproducts.com55