13. Stack the compression discs onto the disc travel limiter. Place the disc stack/travel limiter on the piston rod. (B7).
14. Place the piston on top of the compression stack. Be sure to orient the piston properly. Face the piston side marked with a “C” towards the compression valve stack. (B8)
15. Stack the rebound discs onto the rebound disc travel limiter. Place the disc stack/travel limiter on top of the piston. (B9)
16. Place the piston washer and nut on the piston rod, (B10) and torque to 216
17. Remove the head assembly from the vice.
B7 | B8 |
Piston
Marked
“R”
Piston
Marked
“C”
Stack compression discs onto disc travel limeter | Place piston onto the compression stack |
B9 | B10 |
Stack rebound discs onto rebound disc travel limiter | Place piston washer & nut on piston rod |
& place on piston |
|
