Special Precautions!
BE SURE TO READ AND FOLLOW ALL PRECAUTIONS LISTED BELOW
PRIOR TO BEGINNING WORK ON YOUR SHOCKS.
1.Integra Shocks are nitrogen gas charged for proper operation. Discharge the nitrogen gas in the unit prior to working on your shock. Failure to do so could cause serious injury or death.
2.Keep hands clean and free of dirt, dust, or other loose debris that could become lodged in the tiny passages located in the damper.
3.Rebuilding of your dampers can be done at the track. Be sure to perform any rebuilds in an enclosed space where dirt and dust are at a minimum.
4.Clean any oil spills from the floor immediately to reduce the chance of a slip or fall.
5.Always use safety glasses to reduce the chances of serious eye injury.
6.Be cautious when working over the damper when the nitrogen gas has not been discharged.
7.Read complete manual prior to beginning any work in your shocks.
Part #
Part #
Kit Contents
The following parts are supplied with your Integra shocks valving kit:
Valve disc storage case
Misc. valve discs
Bleed discs
Spare piston bands
Spare rod seals
Spare rod guide seals
Spare end cap seals
Spare floating piston seals
Spare nitrogen fill valves
Spare poppet parts
r |
| Integra Shock Tools | |
n | q |
| |
|
| ||
| 1. | Overflow ring Part # | |
|
| ||
|
| 2. | Rod guide Wrench Part # |
o |
| 3. | Shock Vise Part # |
s4. Set of rod clamps Part #
5.Floating piston locator Part #
6.Body Clamp Part #
p
