Information
⬛RGB SELECT modes
One of these 6 modes must be selected in order to display the following signals correctly.
AUTO .............. Select the suitable mode for the
specifications of input signals as listed in the table “Computer input signals supported by this system” on page 47.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)
WIDE1 ............. When an 852 dot× 480 line signal
with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot× 480 line signal
with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page 47 for the details of the above settings.
⬛Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
Setting high definition images to the suitable screen size
Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080.
Example: Setting the “1080B” mode to “1035I”
Press the PROCEED button on the remote control unit to
display the MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “OPTION”, then press the PROCEED button.
The “OPTION” screen appears.
2.Use the ▲ and ▼ buttons to select “HD SELECT”.
|
| O P T I O N | |||||
| AUDIO INPUT |
|
|
|
| ||
| AUDIO1 |
|
| : | VIDEO1 | ||
| AUDIO2 |
|
| : | HD/DVD1 | ||
| AUDIO3 |
|
| : | RGB1 | ||
| BNC SELECT | : | RGB | ||||
| RGB SELECT | : | AUTO | ||||
| HD SELECT |
| : | 1080B | |||
| PICTURE SIZE | : ON | |||||
| SEL. |
| ADJ. |
|
|
| RETURN |
|
|
|
| EXIT | |||
3.To set the HD SELECT mode to “1035I” ...
Use the ◀ and ▶ buttons to select “1035I”.
The mode switches as follows each time the ◀ or ▶ button is pressed:
→1080A ↔ 1080B ↔ 1035I ←
|
| O P T I O N | |||||
| AUDIO INPUT |
|
|
|
| ||
| AUDIO1 |
|
| : | VIDEO1 | ||
| AUDIO2 |
|
| : | HD/DVD1 | ||
| AUDIO3 |
|
| : | RGB1 | ||
| BNC SELECT | : | RGB | ||||
| RGB SELECT | : | AUTO | ||||
| HD SELECT |
| : | 1035I | |||
| PICTURE SIZE | : ON | |||||
| SEL. |
| ADJ. |
|
|
| RETURN |
|
|
|
| EXIT | |||
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information
⬛HD SELECT modes
These 3 modes are not displayed in correct image automatically.
1080A | Special Digital broadcasts (for |
| example : DTC100) |
1080B | Standard digital broadcasts |
1035I | Japanese “High Vision” signal format |
35
