Integra PLA-50V1 Example Adjusting the White Balance,  Adjusting the white balance

Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality.

Example: Adjusting the “WHITE BALANCE”

Press the PROCEED button on the remote control unit to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE”, then press the PROCEED button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “COLOR TEMP.”.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R				G
PICTURE MODE		:	MEMORY
COLOR TEMP.		:	2
NR		: OFF
SEL.	ADJ.				RETURN
				EXIT

3.Use the
and  buttons to select “PRO”.

The mode switches as follows when the
and  buttons are pressed:

→ 1 ↔ 2 ↔ 3 ↔ PRO ←

COLOR TEMP. : PRO

*If neither the
or  button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

4.Press the PROCEED button.

The “WHITE BALANCE” screen appears.

5.Use the ▲ and ▼ buttons to select “RED-GAIN”.

W H I T E B A L A N C E

GAIN

RED

GREEN

BLUE

BIAS

RED

GREEN

BLUE

SEL. ADJ. EXIT RETURN

6. Adjust the white balance using the
and  buttons.

R-GAIN

*If neither the
or  button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

7.Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

Adjusting the white balance

RGB-GAIN ....... White balance adjustment for signal

level

RGB-BIAS .......White balance adjustment for black

level

Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

22