HMP Linux 1.2 Release Update, Rev 05 — September 2006September 2006 43
3.5.2 Continuous Speech Processing API for Host Media Processing Demo Guide
The Continuous Speech Processing API for HMP Demo is designed to run using a series
of four or fewer contiguous channels. The highest channel number in the series must be
120 or lower. Attempts to run the demo using a channel number higher than 120 will
cause the demo to fail.
(IPY00009701 = PTR 34019)
For Linux, the Continuous Speech Processing API for HMP Demo is located in:
$(INTEL_DIALOGIC_DIR)/demos/SpeechProcessing/CSPDemo/Release/
The demo is started by executing the following command:
./CSPDemo -<option>
3.5.3 IP Media Server for Host Media Processing Demo Guide
The IP Media Server for HMP Demo is designed to run using a series of four or fewer
contiguous channels. The highest channel number in the series must be 120 or lower.
Attempts to run the demo using a channel number higher than 120 will cause the demo to
fail.
(IPY00009701 = PTR 34019)
The following changes and corrections apply:
•The name of this document was originally titled IP Media Server (Global Call) Demo
Guide.
•In Section 3.1.1, “Configuration File Location”, of Chapter 3, “Preparing to Run
the Demo”, the location of the file for Linux should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Release/
•In Section 3.2, “Compiling and Linking” of Chapter 3, “Preparing to Run the
Demo”, the path given in the example for compiling the entire project should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/
and the path given in the example for compiling an individual module should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Modules/FaxModule