User’s Manual
| Item |
| Options | Description |
|
|
| 640x480 18, 800x600 18, | Select Panel Resolution that will be displayed |
|
| 1024x768 18, 1280x1024 36 | depending on the LCD Panel (LFP) | |
| Panel Number | 1400x1050 36, 1600x1200 36 |
| |
| 1280x768 18, 1680x1050 36 |
| ||
|
| 1920x1200 36, 1024x768 18 |
| |
|
|
| 1024x768 36, 1280x800 18 |
|
|
|
| 1280x600 18 |
|
|
|
| Off | Select the output mode of TV Standard |
| TV Standard |
| NTSC |
|
|
| PAL |
| |
|
|
|
| |
|
|
| SECAM |
|
|
|
| Auto, NTSC_M, | This item allows you to select different TV |
|
|
| NTSC_M_J, NTSC_433, | signal format when the TV Standard item is not |
|
|
| NTSC_N, PAL_B, | off. |
|
|
| PAL_G, PAL_D, |
|
| TV Format |
| PAL_H, PAL_I, |
|
|
| PAL_M, PAL_N, |
| |
|
|
| PAL_60, SECAM_L, |
|
|
|
| SECAM_L1, SECAM_B, |
|
|
|
| SECAM_D, SECAM_G, |
|
|
|
| SECAM_H, SECAM_K, |
|
|
|
| SECAM_K1 |
|
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each hard disk drive. The below Figure will shows the IDE primary master sub menu.
Use the following table to configure the hard disk.
Item | Options | Description | |
|
| Press Enter to | |
IDE HDD | Press Enter | this channel. If detection is successful, | |
it fills the remaining fields on this | |||
|
| ||
|
| menu. | |
|
| Selecting ‘manual’ lets you set the | |
IDE Channel 0 Master | None | remaining fields on this screen. | |
IDE Channel 0 Slave, | Selects the type of fixed disk. "User | ||
Auto | |||
IDE Channel 1 Master, | Type" will let you select the number of | ||
Manual | |||
IDE Channel 1 Slave | cylinders, heads, etc. Note: | ||
| |||
|
| PRECOMP=65535 means NONE ! | |
| CHS | Choose the access mode for this hard | |
Access Mode | LBA | disk | |
Large |
| ||
|
| ||
| Auto |
| |
The following options are | selectable only if the ‘IDE Channel …’ item is set to ‘Manual’ | ||
Cylinder | Min = 0 | Set the number of cylinders for this | |
Max = 65535 | hard disk. | ||
| |||
Head | Min = 0 | Set the number of read/write heads | |
Max = 255 | |||
|
| ||
Precomp | Min = 0 | **** Warning: Setting a value of 65535 | |
Max = 65535 | means no hard disk | ||
| |||
Landing zone | Min = 0 | **** | |
Max = 65535 | |||
|
| ||
Sector | Min = 0 | Number of sectors per track | |
Max = 255 | |||
|
| ||