Power Management Setup, PnP/PCI Configurations

¾Init Display First

When boot-start the first time detect device

¾ Onboard FDC Controller	Default: PCI slot
¾ Onboard FDC Controller
Setup onboard FDC controller	Default: Enabled
¾ Onboard Serial Port ½
Setup onboard serial Port ½	Default: 3F8/IRQ4
¾ UART Mode Select
Setup UART mode select	Default: Normal
¾ Onboard Parallel port
Setup select parallel port	Default: 378/IRQ7
¾ Parallel Port Mode
Setup parallel port mode	Default: SPP
¾ Game/Midi Port Address
Setup game/MIDI port address	Default: 201/330
¾ Midi Port IRQ
Setup MIDI port IRQ	Default: 10

6.6 Power Management Setup
¾ ACPI Function
Setup if use ACPI function	Default: Enabled
¾ Video off Method
Setup video off method	Default: DPMS
¾ Video off in Suspend
Setup when video off in suspend	Default: Yes
¾ Suspend Type
Setup suspend type	Default: Stop Grant
¾ MODEM Use type
Setup modem use IRQ	Default: 3
¾ Soft-Off by PWR-BTTN
Setup soft-off type	Default: Instant-Off
¾ Power On by Ring
Setup if use mode wake up	Default: Enabled

¾USB KB Wake-Up From S3

Setup if use USB keyboard wake-up from S3 Default: Enabled

6.7PnP/PCI Configurations

¾Reset Configuration Data

When select Enabled the BIOS restart write system configuration data Default: Disabled

¾Resources Controlled By

System resources parameter setup	Default: Auto (ESCD)
¾ PCI/VGA Palette Snoop
PCI/VGA card color setup	Default: Disabled