Intel 8I845PE-RZ Integrated Peripherals, English, CPU Hyper-Threading, Init Display First

English

CPU Hyper-Threading

Enabled	Enables CPU Hyper Threading Feature. Please note that this feature is only working
	for operating system with multi processors mode supported. (Default value)
Disabled	Disables CPU Hyper Threading.

Init Display First

Select the first initation of m onitor or display from AGP or PCI VGA card.

AGP	Set Init display first to AGP. (Default value)
PCI	Set Init display first to PCI.

Integrated Peripherals

					CMOS Setup Utility-Copyright (C)			1984-2004	Award Software
							Integrated Peripherals
On-Chip Primary PCI IDE							[Enabled]				Item Help
On-Chip Secondary PCI IDE							[Enabled]			Menu	Level}
IDE1	Conductor				Cable		[Auto]
IDE2 Conductor					Cable		[Auto]			[Auto]
USB	Controller						[Enabled]			Auto-detect IDE
USB Keyboard				Support			[Disabled]			cable type
USB Mouse			Support				[Disabled]
AC97 Audio							[Auto]			[ATA66/100/133]
Onboard H/W				LAN *			[Enabled]			Set Conductor cable
Onboard LAN Boot ROM *							[Disabled]			to ATA66/100/133(80
Onboard		Serial			Port	1	[3F8/IRQ4]			-pins)
Onboard		Serial			Port	2	[2F8/IRQ3]
Onboard		Parallel Port					[378/IRQ7]			[ATA33]
Parallel			Port		Mode		[SPP]			Set	Conductor cable
x ECP	Mode		Use	DMA			3			to ATA33(40-pins)
Game	Port		Address				[201]
Midi	Port		Address				[330]
Midi	Port		IRQ				[10]
higf: Move				Enter: Select			+/-/PU/PD: Value	F10: Save	ESC: Exit		F1: General Help
	F5: Previous Values						F6: Fail-Save Default		F7: Optimized Defaults
On-Chip Primary PCI IDE
Enabled					Enable onboard 1st channel IDE port. (Default value)
Disabled					Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled					Enable onboard 2nd channel IDE port. (Default value)
Disabled					Disable onboard 2nd channel IDE port.
IDE1 Conductor Cable
Auto					Will be automatically detected by BIOS. (Default value)
ATA66/100					Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
					and cable is com patible with ATA66/100).
ATA33					Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
					cable is compatible with ATA33).
IDE2 Conductor Cable
Auto		Will be automatically detected by BIOS. (Default value)
ATA66/100					Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
					and cable is com patible with ATA66/100).
ATA33					Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
					cable is compatible with ATA33).

"*" For 8I845PE-RZ only.

8I845PE-RZ Series Motherboard - 24 -