Intel 9545 quick start Configuration Worksheet, For ISDN, For IDSL ISDN Digital Subscriber Line

Configuration Worksheet

These pages help you gather needed information before using a Connection Setup wizard. The information you’ll need varies depending on the router model, your type of service, and the type of connection you want to establish. Consult your telephone company, ISP, and system administrator to determine which parts of this worksheet you should fill in.

Get information from your telephone company for your type of connection

For ISDN

ISDN Switch Type (check one)

Europe

µEuro ISDN / ETSI

Japan
µ KDD	µ NTT
North America
µ National ISDN-1	µ National ISDN-2 µ AT&T 5ESS µ Nortel DMS-100
Australia
µ Austel TS013	µ Euro ISDN / ETSI
ISDN Numbers and SPIDs for your router
Local ISDN Number 1: _____________________		SPID1: _________________
Local ISDN Number 2: ___________________		SPID 2: _________________

Note: You might have one, two, or no SPIDs depending on your ISDN service type.

ISDN Connection Type

µSingle Channel (56 or 64 kbps)

µMultiple Channels (112 or 128 kbps)

µAlways On/Dynamic ISDN (AO/DI)

Local X.25 Address: _________________

Remote X.25 Address: _______________

TEI (Terminal Endpoint Identifier): ________________

For IDSL (ISDN Digital Subscriber Line)

General for all connection types
Service type
µ PPP leased line	µ Frame Relay
Line Speed (kbps)
µ 64	µ 128	µ 144 (ISDN U ports only)
For Frame Relay connections only
LMI Type (DLCMI)
µ Annex D	µ Annex A	µ LMI (Cisco)	µ None

Connection Name (define your own): ___________________

Local DLCI (between 16 and 991): _______

6