Chapter 3
support.
OnChip PCI Device:
This section provides information on setting the
1.AC97 Audio:
This feature allows you to enable/disable the
Super IO Device:
This section provides information on setting the Super I/O devices. Press [Enter] to enter the
1.Onboard FDC Controller:
Select Enabled if your system has a floppy disk controller (FDC) installed on the system board. If you install an
2.Onboard Serial Port 1/2:
Select an address and corresponding interrupt for the first and second serial ports. Available options are [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4],
[2F8/IRQ3], [Disabled], and [Auto].
3.UR2 Duplex Mode:
Available options: [Half] and [Full].
4.Onboard Parallel Port:
Select a logical LPT port address and corresponding interrupt for the physical parallel port.
5.Parallel Port Mode:
Select an operating mode for the onboard parallel (printer) port. Select SPP unless you are certain your hardware and software support one of the other available modes.
6.ECP Mode Use DMA:
This item automatically specifies a DMA channel 1 or 3 for the parallel port when it is set to [EPP] or [ECP+EPP] mode.
7.PWRON After
Available options: [Off], [On], and
8.Game Port Address:
This item disables or assigns the address of the Game port. Available options are
[201]and [209].
9.Midi Port Address:
This item disables or assigns the address of the Midi port. Available options are [300] and [330].
23