Intel 9EJL4 manual JP6 Enable/Disable USB 0/1, Device Wake-UpJumper, JP6 USB 0/1

Chapter 2

1.Disconnect the system power supply from the power source.

2.Set the jumper cap at location [2-3] for <5 seconds>, and then set it back to the default position.

3.Connect the system's power and then start the system.

4.Enter BIOS's CMOS Setup Utility and choose Load Setup Defaults. Type [Y] and then press [Enter] to continue.

5.Set the system configuration in the Standard CMOS Setup menu.

JP6 (Enable/Disable USB 0/1, Device Wake-Up Jumper)

Pin	Definition
1-2	Disable (default)
2-3	Enable

JP6 USB 0/1

An USB keyboard hot key or an USB mouse-click can activate this board. To use this function, select a hot key of your choice at the USB Resume from S3 option under Wake Up Events in the BIOS's Power On Management screen. You must also set this jumper's cap to pins 2-3to use this function.

11