Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper

NOTE

Always turn off the power and unplug the power cord from the computer before changing a jumper. Moving the jumper with the power on may result in unreliable computer operation.

Figure 12 shows the location of the Desktop Board’s BIOS configuration jumper block.

Figure 12. BIOS Configuration Jumper Block

The three-pin BIOS configuration jumper block enables board operating modes. Table 10 shows the jumper settings for each of the available modes.

35

Page 35
Image 35
Intel D425KT manual Setting the Bios Configuration Jumper, Bios Configuration Jumper Block