Intel Desktop Board D845GVFN Product Guide

LAN Subsystem

The Intel 82562ET (with the Intel 82801DB ICH4) provides a Fast PCI LAN subsystem providing both 10Base-T and 100Base-TX connectivity. The Intel 82562ET provides the following functions:

Basic 10/100 Ethernet LAN connectivity

Support for RJ-45 connector with status indicator LEDs

Programmable transit threshold

Configurable EEPROM that contains the MAC address

LAN Subsystem Software

For LAN software and drivers, refer to the D845GVFN link on Intel’s World Wide Web site at:

http://support.intel.com/support/motherboards/desktop/

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector. Table 5 describes the LED states when the desktop board is powered up and the LAN subsystem is operating.

Table 5.

RJ-45 LAN Connector LEDs

 

 

 

 

LED Color

 

LED State

Indicates

 

 

 

 

Green

 

Off

10 Mbit/sec data rate is selected.

 

 

 

 

 

 

On

100 Mbit/sec data rate is selected.

 

 

 

 

Yellow

 

Off

LAN link is not established.

 

 

 

 

 

 

On (steady state)

LAN link is established.

 

 

 

 

 

 

On (brighter and pulsing)

The computer is communicating with another computer on

 

 

 

the LAN.

 

 

 

 

Enhanced IDE Interface

The ICH4’s IDE interface handles the exchange of information between the processor and peripheral devices like hard disks, CD-ROM drives, and Iomega Zip* drives inside the computer. The interface supports:

Up to four IDE devices (such as hard drives)

ATAPI devices (such as CD-ROM drives)

Older PIO Mode devices

Ultra DMA-33 and ATA-66/100 protocols

Laser Servo (LS-120) drives

Expansion Slots

Desktop Board D845GVFN has three PCI bus add-in card connectors.

16

Page 16
Image 16
Intel D845GVFN manual Enhanced IDE Interface, Expansion Slots, LAN Subsystem Software, RJ-45 LAN Connector LEDs