Intel D845GVFN manual Setting the Bios Configuration Jumper Block, Jumper Setting Mode Description

Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper Block

Figure 11 shows the location of the BIOS configuration jumper block.

3	1
J9H2
	OM16282

Figure 11. Location of the BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 9 shows the jumper settings for the Setup program modes.

Table 9. Jumper Settings for the BIOS Setup Program Modes

Jumper Setting Mode Description

		Normal (default)	The BIOS uses the current configuration and passwords for booting.
3	1	(1-2)
		Configure	After the Power-On Self-Test (POST) runs, the BIOS displays the
3	1	(2-3)	Maintenance Menu. Use this menu to clear passwords.

	Recovery	Recovers BIOS from a diskette in the event of a failed BIOS update.
3 1	(None)

37