Installing and Replacing Desktop Board Components
8.Insert the bottom edge of the DIMM into the socket.
9.When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place.
10.Reinstall the PCI Express card if it was removed prior to installing the DIMMs.
11.Replace the computer’s cover and reconnect the AC power cord.
Removing DIMMs
To remove a DIMM, follow these steps:
1.Observe the precautions in "Before You Begin" on page 23.
2.Turn off all peripheral devices connected to the computer. Turn off the computer.
3.Remove the AC power cord from the computer.
4.Remove the computer’s cover.
5.Remove the PCI Express card if it interferes with the DIMM clips from being easily opened and closed.
6.Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of the socket.
7.Hold the DIMM by the edges, lift it away from the socket, and store it in an
8.Reinstall the PCI Express card if you removed it before taking out the DIMM.
9.Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
10.Replace the computer’s cover and reconnect the AC power cord.
35
