Contents
B Regulatory Compliance |
| |
Safety Regulations | 65 | |
European Union Declaration of Conformity Statement | 65 | |
Product Ecology Statements | 67 | |
| 69 | |
EMC Regulations | 70 | |
Product Certification Markings (Board Level) | 72 | |
Figures |
| |
1. | Desktop Board D945GPM Components | 11 |
2. | LAN Port LED Locations | 16 |
3. | Location of the Standby Power Indicator | 20 |
4. | Installing the I/O Shield | 26 |
5. | Desktop Board D945GPM Mounting Screw Hole Locations | 27 |
6. | Lift Socket Lever | 28 |
7. | Lift the Load Plate and Don’t Touch the Socket Contacts | 28 |
8. | Remove the Protective Socket Cover | 29 |
9. | Remove the Processor from the Protective Processor Cover/Do Not Touch | 29 |
10. | Install Processor | 30 |
11. | Close the Load Plate | 30 |
12. | Connecting the Processor Fan Heat Sink Cable to the Processor Fan Connector | 31 |
13. | Dual Configuration Example 1 | 32 |
14. | Dual Configuration Example 2 | 32 |
15. | Dual Configuration Example 3 | 33 |
16. | Installing a DIMM | 34 |
17. | Inserting a PCI Express x16 Card and Covering the Back Panel VGA Port | 36 |
18. | Connecting the IDE Cable | 37 |
19. | Connecting the Serial ATA Cable | 38 |
20. | Internal Headers | 39 |
21. | Location of Fan Headers | 42 |
22. | Connecting Power Supply Cables | 43 |
23. | Location of Other Connectors | 44 |
24. | Location of the BIOS Configuration Jumper | 45 |
25. | Removing the Battery | 51 |
26. | F2 Key | 53 |
vii