Intel GA-N650SLI-DS4 user manual English, Graphics Card Driver Setting

Step 4: Plug the display cable into either one of the two graphics cards for display output. If you plug the display cable into the card on the PCIE_16_1 slot, make sure to set Init Display First in BIOS Setup to PEG; if you plug the display cable into the card on the PCIE_16_2 slot, set Init Display First to PEG(Slot2).

Graphics Card Driver Setting:

Step 1: After installing graphics card driver in operating system, right- click the NVIDIA icon in your system tray and then select NVIDIA Display. The NVIDIA control panel will appear.

Step 2: Select SLI multi-GPUfrom the side menu and then select the Enable SLI multi-GPUcheckbox in the SLI multi-GPU dialog box. System will restart after you click Apply. Then the SLI configuration is completed.

(Note) For more information about software configurations for SLI, refer to the user's manual for your graphics card.

English

- 19 - Hardware Installation