Intel® IQ80332 I/O Processor

Introduction

1.7Intel® IQ80332 I/O Processor Evaluation Platform Board Features

Table 5.

Summary of Features

 

 

 

 

 

 

Feature

 

Definition

 

 

 

 

Battery Backup Unit:

Battery back up circuit for SDRAM.

 

 

 

 

Ethernet

Intel(R) 82545EM Gigabit Ethernet Controller

 

 

 

 

Flash ROM:

8 MB Flash ROM 3.3 V – 16-bit Flash I/F.

 

 

 

 

Form Factor:

PCI-X card (312 X 107 mm)

 

 

 

 

General Purpose I/O:

GPIO Pins are used as described in the appropriate section in this document

 

 

 

 

Hex Display:

Two 7-segment Hex LED displays.

 

 

 

 

JTAG Port:

ARM compliant JTAG Header.

 

 

 

 

Logic Analyzer:

Logic analyzer connectors on the DDRII SDRAM interface.

 

Interposer Card may be used for the memory bus – Information supplied separately.

 

 

 

 

 

• 256 MB (512 Mb x 16) DDRII SDRAM 400 MHz DIMM.

 

Memory:

ECC

 

 

Registered

 

 

 

 

 

Board sources +1.25 V, +2.5 V, +3.3 V, +5 V, +12 V, and -12 V from primary PCI

 

Onboard Power:

connector.

 

 

• All core voltages are derived from 3.3 V supply.

 

 

• Auxiliary power for the Secondary PCI slot.

 

 

 

 

Power LED:

Power on (green).

 

 

 

 

Primary PCI:

PCI Express - x8 lane

 

 

 

 

 

Support for “RAID” Implementation – Ability to make the devices plugged in the

 

RAID Support

secondary expansion slots “Private”.

 

 

Integrated XOR engine and two iSCSI CRC32C off-load engines.

 

 

 

 

 

• 1 64-bit PCI-X connector - 133 MHz.

 

Secondary PCI:

• 1 64 bit 100 MHz PCI-X

 

 

• Intel(R) 82545EM Gigabit Ethernet Controller also on the 100 MHz PCI.

 

 

 

 

Serial Port:

Dual RJ11 serial port connectors. The 80332 has two integrated UART serial ports

 

 

which are 16550 compatible.

14

Evaluation Platform Board Manual

Page 14
Image 14
Intel IQ80332 manual Summary of Features, Feature Definition

IQ80332 specifications

The Intel IQ80332 is a high-performance microprocessor designed primarily for embedded applications, showcasing Intel's commitment to delivering powerful computing solutions for a variety of industries. Launched as part of Intel’s post-Pentium architecture, the IQ80332 is built on a robust architecture that combines efficiency with advanced performance capabilities, making it particularly suitable for industrial, telecommunications, and networking environments.

One of the standout features of the IQ80332 is its support for wireless communication technologies, providing seamless connectivity options for embedded devices. The chip integrates advanced power management features, enabling it to operate efficiently, which is crucial for systems that demand low power consumption without sacrificing performance.

The processor is built on a scalable architecture that supports a wide range of applications, from simple control operations to complex data processing tasks. It has a diverse instruction set, allowing developers to leverage a variety of programming paradigms for optimizing application performance. This versatility makes the IQ80332 a preferred choice for developers looking to build sophisticated embedded systems.

Another key characteristic of the IQ80332 processor is its robust security features. It includes hardware-level security measures that help protect sensitive data and maintain system integrity—an essential requirement in today’s connected environments where cyber threats are prevalent.

Additionally, the Intel IQ80332 supports multiple system interfaces, allowing for easy integration with various peripherals. Its compatibility with industry-standard buses makes it an ideal choice for upgrading existing systems without extensive redesign efforts.

Moreover, the chip is capable of running multiple operating systems, which provides developers with flexibility in choosing the best software platforms for their applications. This multitasking ability contributes to its efficiency, making it a noteworthy contender in the embedded processing market.

In summary, the Intel IQ80332 microprocessor is characterized by high performance, low power consumption, and robust security features. Its versatility, combined with advanced connectivity options and strong support for multiple operating systems, makes it a valuable asset in the development of next-generation embedded systems across a multitude of sectors. As industries continue to evolve, the IQ80332 remains a compelling solution for engineers and developers seeking reliable and efficient computing power.