INSTALLATIONS
Setting the Jumpers
Jumpers are used on MB896 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MB896 and their respective functions.
Jumper Locations on MB896 | 10 |
JP2: Pentium M VccA Voltage Selection | 11 |
JP3: LCD Panel Power Selection | 11 |
JP4: Clear CMOS Setting | 11 |
JP5: CompactFlash Slave/Master Selection | 11 |
JP6: 1394 EPROM Write Selection | 11 |
IMPORTANT NOTE: When the system boots without the CRT being connected, there will be no image on screen when you insert the CRT/VGA cable. To show the image on screen, the hotkey must be pressed.
MB896 User’s Manual | 9 |
