INSTALLATIONS
J11: ATX_12V Connector
J11 can be used in situations where the 12V current from the ATX power is insufficient to supply needed current.
Pin # | Signal Name |
1 | Ground |
2 | Ground |
3 | +12V |
4 | +12V |
ATX1: ATX Power Supply Connector
Signal Name | Pin # | Pin # | Signal Name |
3.3V | 13 | 1 | 3.3V |
14 | 2 | 3.3V | |
Ground | 15 | 3 | Ground |
16 | 4 | +5V | |
Ground | 17 | 5 | Ground |
Ground | 18 | 6 | +5V |
Ground | 19 | 7 | Ground |
20 | 8 | Power good | |
+5V | 21 | 9 | 5VSB |
+5V | 22 | 10 | +12V |
+5V | 23 | 11 | +12V |
Ground | 24 | 12 | +3.3V |
J1: IrDA Connector |
|
|
|
Pin # | Signal Name | ||
1 |
| +5V |
|
2 |
| No connect |
|
3 |
| Ir RX |
|
4 |
| Ground |
|
5 |
| Ir TX |
|
MB896 User’s Manual | 17 |
