Intel PMG41-D2 user manual Audio Line-In, Lin-Out, MIC Connector SURROUND1

(6) Audio Line-In, Lin-Out, MIC Connector: SURROUND1

This Connector is 3 phones Jack for LINE-OUT, LINE-IN, and MIC

Line-out: (GREEN)	Audio output to speaker
Line-in: (BLUE)	Audio input to sound chip
MIC: (PINK)	Microphone Connector

PS/2		Line-IN
Mouse	LAN
COM	VGA		Line-OUT
PS/2		MIC-IN
	USB1
Keyboard

(7)Floppy drive Connector (34-pin block): FLOPPY

This connector supports the provided floppy drive ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to the floppy drives.

FDD

Pin 1

Floppy Drive Connector

(8)Primary IDE Connector (40-pin block): IDE

This connector connects to the next set of Master and Slave hard disks. Follow the same procedure described for the primary IDE connector. You may also configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ribbon cable on the secondary IDE connector.

zTwo hard disks can be connected to each connector. The first HDD is referred to as the “Master” and the second HDD is referred to as the “Slave”.

zFor performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system performance on this channel may drop.

9