Intel PRO/100 appendix Save the files and reboot the PC

Windows 3.x/MS-DOS Installation 4-17

8Press Esc twice to bypass error messages.

9 Continue with the installation until finished.

10Use a text editor to add the following two lines in your CONFIG.SYS file at the location indicated by the “rem” statement concerning insertion of the driver name:

DEVICE=\LSP\M16BNDIS.EXE

11Copy M16BNDIS.EXE from the directory C:\INTEL\M16B to the C:\LSP directory on your hard disk.

12Use a text editor to edit the PROTOCOL.INI keyword settings in the C:\LSP directory to match the keywords contained in the sample PROTOCOL.INI file located at C:\INTEL\M16B as required (unless you are using Intel PRO/100 default settings).

13Save the files and reboot the PC.

IBM Local Area Network Support Program (version 1.2)

NDIS 2.0 Driver

1Run the Installation Program from Intel Disk 1, Installation Disk.

2Choose IBM LAN Support Program from the Select Network Operating System screen.

3Follow the prompts to complete the Intel segment of the installa- tion.

4Install the IBM Local Area Network Support Program according to the instructions in the IBM Local Area Network Support Program User’s Guide. The following instructions refer to the prompts and messages displayed with the Configuration Aid automated install software provided with the LAN Support Program.

5If a message appears during the LAN Support Program installation indicating there are no IBM LAN adapters installed in the worksta- tion, bypass the message by pressing Enter.

6Answer [N]o to program support for the PC Network Adapter.

7Answer [Y]es to use of programs needing the NETBIOS interface.

8When prompted, select the Etherand Network family of network cards.

9Continue with the installation until finished.