Belkin PRO2 user manual The mouse is not detected at boot-up, T R O U B L E S H O O T I N G

T R O U B L E S H O O T I N G

The mouse is not detected at boot-up.

• Check the cables and make sure that they are inserted correctly.

The computer boots up, but the mouse does not work.

•Make sure the mouse is plugged in properly.

•Make sure the mouse works when directly plugged into the computer. Rebooting may be necessary when trying this.

•Try a different mouse.

When I switch from one port to another, mouse movement is completely erratic.

•Make sure you do not have more than one mouse driver installed. Make sure that the driver is either for a standard PS/2 mouse or a Microsoft computer-compatible PS/2 mouse.

•Make sure you do not have any mouse drivers loaded in your CONFIG.SYS or AUTOEXEC.BAT files.

•Avoid moving the mouse or pressing the mouse button when switching ports on the PRO2.

•You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from the front of the PRO2 for about 2-3 seconds, and then plugging it in again.

32