Manuals / Belkin / Computer Equipment / Switch

Belkin PRO2 Installation, Before You Begin, Adding Additional Slave Units, I N Sta L L At I O N

Models: PRO2

1 37

Download 37 pages 59.87 Kb

Page 16

Installation

I N STA L L AT I O N

Installation

Before You Begin:

1.Make sure that all computers are powered off and that each PRO2 has been assigned a unique BANK address.

2.Place Master and Slave switches in the desired location. Make sure all are turned off and unplugged from the power source.

3.Connect the Console monitor, keyboard, and mouse to the Console ports of the Master switch or Bank 00, as described previously in this installation guide.

Connecting the Master Switch to the First Slave Switch:

4.Using the daisy-chain cable (F1D108-CBL), connect one end of the cable to the “Master Input/Slave Output” port on the Master switch (BANK 00).

5.Connect the other end of the daisy-chain cable to the “Master Input/Slave Output” port of the first Slave switch (BANK 01).

Adding Additional Slave Units:

6.Using the daisy-chain cable (F1D108-CBL), connect one end of the cable to the available daisy-chain port labeled “Slave Input” on the Slave switch (for example, BANK 01).

7.Connect the other end of the daisy-chain cable to the “Master Input/Slave Output” port of the Slave switch that you are adding

(for example, BANK 02).

8.Repeat steps 6 and 7 for additional PRO2s you wish to daisy-chain together.

14

Image 16

Belkin PRO2 Installation, Before You Begin, Connecting the Master Switch to the First Slave Switch, I N Sta L L At I O N

Contents

PRO2 Series KVM Switch OmniViewUser Manual PRO2 SeriesInstallation Using your PRO2Belkin KVM Switches and Accessories TA B L E O F C O N T E N T SPRO2 Series KVM Switch Package ContentsOmniView Feature Overview Video ResolutionFlash Upgrade O V E RV I E WEquipment Requirements Front-Panel Push ButtonLED Display Seven-Segment LED DisplayOmniView PRO2 Series KVM Switches are for use on CPUs using Platforms Operating SystemsOmniView All-In-One PRO Series Plus OmniView All-In-One Gold SeriesSide View of the PRO2 BANK DIP switchFLASH DIP switch O V E RV I E WFront View of the PRO2 Back View of the PRO2O V E RV I E W selected BANK identificationSpecifications Max. Resolution 2048x1536@85Hz Bandwidth 400MHzPort LED Indicators 4 F1DA104T DimensionsPre-Configuration Where to Place the PRO2Consider the following when deciding where to place the PRO2 I N STA L L AT I O NStep-by-Step Installation Guide Installing the PRO2 into a Server RackBracket Installation F1DA108T and F1DA116T only I N STA L L AT I O NSingle PRO2 Installation PS/2 Installation Keyboard, Video, and Mouse ConnectionsConnect the Console I N STA L L AT I O NUSB Installation Connect the Computer PS/2 InstallationI N STA L L AT I O N USB cables Connecting Multiple PRO2s Daisy-ChainingI N STA L L AT I O N BANK DIP Switch Configuration Chart I N STA L L AT I O NInstallation Connecting the Master Switch to the First Slave SwitchBefore You Begin Adding Additional Slave UnitsConnecting the Computers Example of Daisy-Chain ConfigurationI N STA L L AT I O N Using Your PRO2 Powering up the SystemsU S I N G YO U R P R O Selecting a Computer Using Keyboard Hot Key Commands + +Switch to previous active port-Up arrow Switch to BANK 00, PortSelecting a Computer Using Direct-Access Port Selectors U S I N G YO U R K V M SW I T C HAutoScan Mode BANK Up and BANK Down Scroll ButtonsKeyboard Hot Key Commands U S I N G YO U R P R OOn-Screen Display Menu Control U S I N G YO U R P R OTo update the firmware, you will need the following items AutoScan TimeOSD Display Time Updating FirmwareConnecting Computers Setting the PRO2 into Flash ModeDIP Switch FirmwareBELKIN KVM SWITCHES AND ACCESSORIES OmniView KVM SwitchesSeries 2x8-Port KVM Switch PS/2 & USB BELKIN KVM SWITCHES AND ACCESSORIESSeries 2x16-Port KVM Switch PS/2 & USB OmniView All-In-One KVM Cables BELKIN KVM SWITCHES AND ACCESSORIESOmniView Accessories and Adapters BELKIN KVM SWITCHES AND ACCESSORIESPRO2 SERIES FAQs PRO2 SERIES FAQs Q How far can the computer be from the PRO2?PRO2 SERIES FAQs Q Does the PRO2 require an AC adapter?T R O U B L E S H O O T I N G GeneralVideo I am getting ghosting, shadowing, or fuzzy images on my monitorThe mouse is lost when I switch to a different port KeyboardMouse T R O U B L E S H O O T I N GThe computer boots up, but the mouse does not work The mouse is not detected at boot-upT R O U B L E S H O O T I N G T R O U B L E S H O O T I N G WARRANTY, FCC , CE, ICES STATEMENT F1DA104T, F1DA108T, F1DA116TFCC Statement Belkin Components Limited Five-Year Product Warrantybelkin.com Belkin Components P73782-ABelkin Components B.V