Belkin Single PRO2 Installation, PS/2 Installation Keyboard, Video, and Mouse Connections

I N STA L L AT I O N

Your PRO2 is now mounted securely into the bracket and you are ready to connect cables to the back of the unit.

Note for Belkin PRO Series owners (F1D104-OSD, F1D108-OSD, F1D116-OSD): Installation for the PRO has changed. Please follow this installation manual completely to assure proper installation. Failure to do so may result in keyboard or mouse errors, and/or faulty operation.

Single PRO2 Installation

This section provides complete instructions for the hardware setup of a single PRO2. (F1DA104T, F1DA108T, and F1DA116T)

PS/2 Installation:

Keyboard, Video, and Mouse Connections

Connect the Console:

1.Connect the monitor to the PRO2. Attach your monitor cable to the HDDB15 female port on the back of the PRO2 labeled "Console VGA".

2. Connect the PS/2 keyboard cable to the keyboard port on the back of the PRO2 in the "Console" section.

3. Connect the PS/2 mouse cable to the mouse port on the back of the PRO2 in the "Console" section.

VGA

VGA08

USB08

VGA07

06 VGA06

USB06

VGA05

VGA04

USB04

VGA03

VGA 02

USB02

VGA01

08

USB 07

07

06

USB 05

05

04

USB 03

03

02

USB 01

01

VGA

VGA08

USB08

VGA07

06 VGA06

USB06

VGA05

VGA04

USB04

VGA03

VGA 02

USB02

VGA01

08

USB 07

07

06

USB 05

05

04

USB 03

03

02

USB 01

01

Attach the power supply to the DC power jack labeled "DC 12V, 1A" located on the rear of the PRO2. Once the power is connected to a power source, the LED for port 01 will begin flashing. Sequentially push the direct-access port selectors for ports 01 through 08 (04 for F1DA104T and 16 for F1DA116T). The corresponding LED should flash as each button is pressed, indicating that the port is ready for connecting your servers (computer connection).

10