Intel ReValver MK III manual

20

Module name = M-998

Description = This simple power amp, uses 2 triodes in series for extra gain, and also uses a pair of tonal character filters, that can be tweaked in the Tweak GUI.

Module name = Standard Power Amp #2

Description = This power amp has a standard push-pull end stage, but not driven by the usual Long Tail Pair (LTP). It does have a “clean” switch for less drive and slightly different tonal char­ acter.

Module name = ‘62 BluesMaker power amp

Description = This power amp is taken directly out of the ‘62 BluesMaker. It has a drive and pres­ ence control, and has a standard Negative Feedback Loop (NFB) to which the presence control is attached. The NFB shapes the distortion character of the power stage.