Intel ReValver MK III manual

Models: ReValver MK III

1 45
Download 45 pages 1.05 Kb
Page 18
Image 18

17

Module name = Pre-HB

Description = Simple preamp for clean and slightly overdriven sounds. The preamp goes easily into overdrive, but distorts gently and relatively cleanly.

Module name = Pre-02

Description = This preamp has 2 parallel channels: a triode tube path and a diode clipping path. The tube sound mixed with diode distortion makes an interesting and dynamic mix as the two components deliver two different overtone spectra.

Module name = ‘62 BluesMaker preamp

Description = This preamp was taken directly from the BluesMaker ‘62 amp. It contains both the clean and tremolo channels, including the tremolo controls.

Module name = Basic 100 bass preamp

Description = This is the bass channel preamp in the Basic 100. The tone section does not include a mid control, as the original does not have one. The Deep switch lowers the frequency of the bass control.

Page 18
Image 18
Intel ReValver MK III manual