11SB-6862
System Memory
There are a total of four banks available for memory
upgrades. The board supports DIMM in the following
combinations:
1M x 64/72 = 8 MB/bank
2M x 64/72 = 16 MB/bank
4M x 64/72 = 32 MB/bank
8M x 64/72 = 64 MB/bank
16M x 64/72 = 128 MB/bank
32M x 64/72 = 256 MB/bank
Installing and Removing DIMM
Read these instructions completely before installing or
removing DIMMs. The DIMM is held by plastic press-clips
on both sides of the slot.
Installing DIMM
1) Hold the DIMM so that the gold tab is pointing toward the
slot. The DIMM is keyed so that it will only snap into the
slot when positioned correctly.
2) Press one end of the DIMM until it inserts and its press-
clip snaps into place.
3) Press the other end of the DIMM until it inserts and its
press-clip snaps into place.
Removing DIMM
1) Pull both press-clips simultaneously, until the DIMM pops
up from its slot.