21SB-6862
Pri Slave Primary slave IDE/PCI hard drive. Define the
parameters of your hard disk and modes. The default
setting is Auto, to auto-detect drive type.
Sec Master Secondary master IDE/PCI hard drive, if
installed. Define the parameters of your hard disk and
modes. The default setting is Not Installed.
Sec Slave Secondary slave IDE/PCI hard drive, if installed.
Define the parameters of your hard disk and modes. The
default setting is Not Installed.
Note: You may also manually enter the hard disk
parameters. Two helpful tables appear at the end of this
section. One describes drive parameters, and the other is a list
of various hard drive parameters.
Floppy Drive A:/Floppy Drive B Select the type that
matches the drive installed. Scroll through the fields using the
up and down arrows. You may select from the following:
Date/Time Enter new values through the keyboard.
Use the arrow keys to toggle between items. Available options
for the highlighted item are displayed on the right side of the
menu. Press <PgUp> or <PgDn> to toggle through available
options.
5.25 3.5
360 KB 720 KB
1.2 MB 1.44 MB
2.88 MB