Intel SE7500CW2 manual Jumpers and Bios Setup Options

reliability: http://support.intel.com/support/motherboards/server/SE7500CW2

Jumpers and BIOS Setup Options

1) How should the jumpers be set on Intel Server Board SE7500CW2?

For normal operation, the jumpers are set correctly from the factory. Refer to the Technical Product Specification for more information on configuration jumper settings.

Input/Output

1)Does the Intel® Server Board SE7500CW2 support Ultra ATA/33/66/100 hard drives?

Yes. One of the features of the Intel Server Board SE7500CW2 is its ability to support all Ultra ATA transfer rates (i.e., 33MB/sec, 66MB/sec, and 100 MB/sec). To take advantage of the increased bandwidth available on the IDE channels, a hard drive that implements higher spindle speeds and a large onboard buffer size may be required.

2)What IDE cable should I use to support both Ultra ATA/100 and previous IDE transfer protocols.

A 40-pin, 80-conductor cable can be used with Server Board SE7500CW2 and is fully backward compatible with all IDE transfer protocols. It will also support Ultra ATA/100 if used with one or two Ultra ATA/100 drives attached.

SE7500CW2 Troubleshooting Guide - 13 - 08/21/02