Intel TM700 manual System Power Cables, Cabling a CD/DVD-ROM or CD-RW Drive

Models: TM700

1 132
Download 132 pages 19.51 Kb
Page 93
Image 93

TM700 User Guide - Upgrading Your System

The following picture shows a S-ATA cable. Black side goes to hard disk drive; blue side goes to motherboard.

Figure 4 - 25 : S-ATA Cable

System Power Cables

Power cables come from the power supply and are attached to standard storage devices. System power cables vary in length and provide connector sizes to accommodate a variety of supported storage configurations. Power cable connectors are keyed to fit only in the correct position. The following figures respectively show the power cable connector for an IDE storage device and the power cable adaptor for a S-ATA device.

Figure 4 - 26 : IDE Storage Device Power Cable Connector

Figure 4 - 27 : S-ATA Storage Device Power Cable Adaptor

Cabling a CD/DVD-ROM or CD-RW Drive

All storage devices require power and IDE cable connections. Devices shipped with the system are already connected.

The following procedure explains how to attach the cables to a CD/DVD-ROM or CD- RW drive.

1.Connect the IDE cable connector (B) to the matching pins on the storage device.

4 - 33

Page 93
Image 93
Intel TM700 manual System Power Cables, Cabling a CD/DVD-ROM or CD-RW Drive