B. Agency Approvals
Read all safety information provided in the component product user manuals and
understand the precautions associated with safety symbols, written warnings, and cautions
before accessing parts or locations within the unit. Save this document for future reference.
Caution: To Avoid Electric Overload: To avoid electrical hazards (heat shock and/or fire
hazard), do not make connections to terminals outside the range specified for that
terminal. See the product user manual for correct connections.
Caution: To Avoid the Risk of Electric Shock: When supplying power to the system,
always make connections to a grounded main. Always use a power cable with a grounded
plug (third grounding pin). Do not operate in wet, damp, or condensing conditions.
Caution: System Airflow Requirements: Platform components such as processor
boards, Ethernet switches, etc., are designed to operate with external airflow. Components
can be destroyed if they are operated without external airflow. Chassis fans normally
provide external airflow when components are installed in compatible chassis. Filler panels
must be installed over unused chassis slots so that airflow requirements are met. Please
refer to the product data sheet for airflow requirements if you are installing components in
custom chassis.
Caution: Microprocessor Heatsinks May Become Hot During Normal Operation: To
avoid burns, do not allow anything to touch processor heatsinks.
Caution: Do Not Operate Without Covers: To avoid electric shock or fire hazard, do not
operate this product with any removed enclosure covers or panels.
Caution: To Avoid the Risk of Electric Shock: Do not operate in wet, damp, or
condensing conditions.
Caution: Do Not Operate in an Explosive Atmosphere: To avoid injury, fire hazard, or
explosion, do not operate this product in an explosive atmosphere.
Caution: If Your System Has Multiple Power Supply Sources: Disconnect all external
power connections before servicing.
Warning: Power Supplies Must Be Replaced by Qualified Service Personnel Only.
Caution: Lithium Batteries Are Not Field-Replaceable Units: There is a danger of
explosion if a battery is incorrectly replaced or handled. Do not disassemble or recharge
the battery. Do not dispose of the battery in fire. When the battery is replaced, the same
type or an equivalent type recommended by the manufacturer must be used. Used
batteries must be disposed of according to the manufacturer’s instructions. Return the unit
to Intel for battery service.
33