40 INT4000 Cordless Telephone User Guide
To enable DND:
1. Dial .
2. Dial the two-digit number corresponding to the message you want to use.
3. If desired, customize the second display line by dialing the desired numbers or
letters as described below:
Remain in numeric mode: Press the dialpad buttons to dial the desired num-
bers. Press for a hyphen (-) or press for a colon (:). Press FOR-
WARD once to enter a space, or press BACKSPACE if you need to
backspace.
Change to alphanumeric mode: Press MSG and then press the dialpad but-
tons to enter the desired characters. (Note that letter correspond to the letters
printed on the buttons 2-9.) The number of times a button is pressed deter-
mines which character is entered. For example, 33377744432999 enters
“FRIDAY.” When adjoining characters are located under the same button,
press FORWARD once to advance to the next character. For example, 6
FWD 666 FWD 6632999 enters “MONDAY.” Press FORWARD twice to
leave a space or press BACKSPACE if you need to backspace.
NOTE: To use the BACKSPACE button, you must pre-program the feature
button (feature code 314) on your phone. Refer to Programming Your Feature
Buttons section on page5 6 for details on how to program the BACKSPACE
button. Also to use the FORWARD, PREVIOUS, NEXT, or MSG button, your
System Administrator must program them in Database Programming.
4. Press .
To cancel DND mode:
Dial .
3 7 2
#
*
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 12345
1-&()1
2ABC'2
3DEF!3
4GHI*4
5JKL
# or /*5
6MNO
Ñ or #*6
7PQRS7
8TUV?8
9WXYZ9
0@:.,0
*The character available depends on the software version.
TALK
3 7 2