59
INT4000 Cordless Telephone User Guide
MOVING ON
To perform a directory search:
1. Dial .
2. Press for the intercom directory, press for the outside directory, or press
for the feature directory.
3. Enter letters or numbers (up to 10 characters) as described below:
• Remain in alphanumeric mode: Press the dialpad buttons to enter the desired
characters. (See the chart below.) The number of times a button is pressed
determines which character is entered. For example, 77776444844 would
enter “SMITH.” When adjoining characters are located under the same but-
ton, press FORWARD once to advance to the next character. For example,
5666 FWD 66337777 would enter “JONES.” (Note that the letters corre-
spond to the letters printed on dialpad buttons 2-9.) Press FORWARD twice
to leave a space or press BACKSPACE to backspace.
NOTE: To use the BACKSPACE button, you must preprogram the feature
button (feature code 314) on your phone. Refer to Programming Your Feature
Buttons section on page5 6 for details on how to program the BACKSPACE
button. Also, to use the FORWARD, PREVIOUS, NEXT, or MSG button, your
System Administrator must program them in Database Programming.
• Change to numeric mode: Press MSG and then press the dialpad buttons to
enter an extension number.
4. Press to begin the search.
To dial a number or feature code while it is displayed:
1. Press .
2. The display will time out if the number is not dialed.
3 0 7
1 2
3
#
#
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 12345
1-&()1
2ABC'2
3DEF!3
4GHI*4
5JKL
# or /*5
6MNO
Ñ or #*6
7PQRS7
8TUV?8
9WXYZ9
0@:.,0
*The character available depends on the software versio
n