Interex MHL331D manual Recommended Attachments, 22,046 lbs, 2,360 lb/yd

HEIGHT	UNDERCARRIAGE				REACH ft
ft	STABILIZERS	15	20	25	30	35	40
35	non supported			(8,330)
	4-pt. supported			9,590* (9,590*)
30	non supported			(8,500)	(6,200)
	4-pt. supported			11,320* (11,320*)	8,960* (8,960*)
25	non supported			(8,470)	(6,230)	(4,690)
	4-pt. supported			11,330* (11,330*)	9,690 (10,720*)	6,930* (6,930*)
20	non supported			(8,270)	(6,120)	(4,680)
	4-pt. supported			11,850* (11,850*)	9,580 (10,960*)	7,440 (9,090)
15	non supported		(11,260)	(7,930)	(5,930)	(4,580)
	4-pt. supported		14,660* (14,660*)	12,500 (12,820*)	9,370 (11,470*)	7,340 (8,990)
10	non supported	(16,190)	(10,470)	(7,500)	(5,680)	(4,440)	(3,500)
	4-pt. supported	22,080* (22,080*)	16,950* (16,950*)	12,010 (14,040*)	9,100 (11,190)	7,190 (8,830)	5,780 (6,880*)
5	non supported	(14,450)	(9,650)	(7,050)	(5,410)	(4,300)	(3,500)
	4-pt. supported	25,570 (26,780*)	16,090 (19,210*)	15,510 (14,330)	8,810 (10,890)	7,030 (8,670)	5,780 (6,880*)
0	non supported	(13,460)	(9,110)	(6,730)	(5,230)	(4,190)
	4-pt. supported	20,400* (20,400*)	15,350 (19,580)	11,090 (13,890)	8,570 (10,630)	6,900 (8,530)
- 5	non supported	(12,790)	(8,630)	(6,420)	(5,040)	(4,100)
	4-pt. supported	16,480* (16,480*)	14,920 (19,120)	10,820 (13,600)	8,410 (10,460)	6,820 (8,450)
- 10	non supported			(6,320)
	4-pt. supported			10,710 (13,490)

RECOMMENDED ATTACHMENTS

LIFT HOOK	22,046 lbs
TEREX® FUCHS	Open or half-closed tines
CACTUS GRAB 0.52 yd3
GRAB FOR LIGHTWEIGHT	Loose goods density up to
MATERIALS 0.78 yd3	2,360 lb/yd3
MAGNET SYSTEM	Terex® Fuchs magnetic plate

Capacity values are stated in (lbs). The pump pressure is 5,221 psi. The values, in accordance with ISO 10567, amount to 75% of the static tipping load or 87 % of the hydraulic lifting force (marked *). They apply to slewing operations through 360° on a firm and level surface.

Values in brackets apply to the longitudinal direction of the undercarriage. “Non-supported” values only apply when the load is hoisted above the front or rear axle.

The weight of the attached hoisting equipment (grab, coupler, magnet, lift hook, etc.) must be deducted from the capacity values. In accordance with CE guidelines, hose-rupture protection valves on the lift cylinders and an overload warning device are required for crane operations.

09