VERSAPOINT RF WIRELESS KEYBOARD

Getting Started

System

§ IBM PC compatible computer

Requirements

§

USB port available

 

§

Microsoft Windows 98 or higher

Installing the 1. Turn the keyboard over onto its face. Keyboard

Batteries 2. By pressing the latch tab toward the center of the keyboard, pry open the battery door with your fingers.

3.Insert 4 AA alkaline batteries (included) with the positive (+) and negative (-) orientation as shown inside the compartment (negative is at the flat end of the battery and goes toward the spring).

4.Replace the battery door by ensuring both retaining tabs fit into their slots and the latch tab snaps into place.

Connecting

1.

Shut down Windows and turn off your computer.

the Receiver

2.

Locate an enabled USB port on the back of your

 

 

computer.

 

3.

Plug the connector on the end of the receiver

 

 

cable into the USB port on your computer.

 

4.

Start Windows and follow the on-screen instruc-

 

 

tions to enable/install the Windows drivers for

 

 

the USB. keyboard and mouse as needed.