VERSAPOINT RF WIRELESS KEYBOARD

Changing

the Receiver

Address

1.Locate the slot cutout on the back of the receiver between the antenna and the cable. The switches can be seen inside the cutout slot.

2.The receiver must be set to the same address as the keyboard described above. The switches are set in the same way as those on the keyboard using the table above.

Power your computer back on.

Position the receiver as described in the next section.

Positioning the Receiver

The receiver is multi-positional and the antenna can be articulated. If you are placing it on a table or desktop, it is best to stand the antenna up to minimize any disruption of the signal by the table or desk.

When you are mounting or positioning the receiver, be careful not to locate the antenna too close to metal objects. The keyboard should not be placed too close to metal objects.

"