Intermec 600 manual Customer Response Center and Product Service, Resetting, Factory Service

General Information SECTION 1

"The 600 Series Single/Vehicle Dock provides a stan- dard PC compatible DB-9 (male) serial port.

"The 600 Series Multidock converts the signals from the computer’s RS-232 serial port to RS-485 and brings out an RS-485 bus to two DB-9 female connec- tors compatible with Norand RS-485 networking.

Resetting

In the rare event that your Industrial Mobile Computer fails to respond to your input, it may be necessary to “reset.” To reset press the [Gold], [Esc], and [0] keys at the same time, hold the keys down for three seconds, and your computer will reboot. Resetting takes you to the start up screen.

Reset keys

Figure 1-5

Resetting your Computer

Customer Response Center and Product Service

Factory Service

If your unit is faulty, you can ship it to your nearest authorized Service Center for factory-quality service. The address and telephone number are included on the Product Service Information Card shipped with your product.

1-10NORANDR 600 Series Industrial Mobile Computer User’s Guide