Intermec 600 manual Condition Solution Power

Troubleshooting SECTION 4

	Table 4-1 (continued)
Basic Troubleshooting
Condition		Solution
The Power		The Power Status LED on the front
Status LED		panel of your mobile computer
Starts Blinking		informs you of the status of your
		battery pack when it is connected to
		a charging device. The Power Status
		LED reads:
		Off when in a normal operating
		mode;
		Blinking red when the battery is
		low;
		Continuous red when charging;
		Continuous green when done
		charging;
		Blinking green when in a standby
		mode.
Mobile Computer		1. Battery is Critically Low.
Will Not Power		2. Ensure that your computer has
Up, Screen is		been on a charger for at least five
Blank.		minutes, then remove from the dock
		and perform the reset procedure. The
		display will then be active.
		3. Continue to charge your mobile
		computer for 4 hours to ensure that
		the battery is fully charged.
Mobile Computer		1. Ensure the dock is plugged in and
Will Not Turn ON		your computer is securely seated in
When Placed In		the dock..
A Dock
Mobile Computer		1. You may have a very low battery,
Shuts Down		try recharging the battery.
During
Operation.

4-2NORANDR 600 Series Industrial Mobile Computer User’s Guide