Chapter 2 — Configuring the PB50
Using Extended Test Mode
Use Extended Test mode to run additional diagnostic tests, including printing specific test labels, entering Dump mode, and resetting to factory defaults.
TEST LABELS
CHESS
Sample Extended Test Mode Screen
To enter Extended Test mode
1Make sure that the printer is loaded with media.
2Press the media cover release button to open the media cover.
3Press the Standby button to turn the printer off.
4Press Feed and Standby buttons at the same time until CLOSE PRINTER DOOR appears on the screen.
5Close the media cover. You are now in Extended Test mode.
•Press 
to cycle through the options.
•Press 
to select a test option.
•Press 
to exit Extended Test mode.
Options in Extended Test Mode
Function | Description | ||
|
|
|
|
Select Media | This option is almost the same as the | ||
| process in Test mode, except that the | ||
| printer performs a slow test feed in | ||
| Extended Test mode. The slow test feed | ||
| enables the printer to perform a slow | ||
| sensor calibration which can help resolve | ||
| gap or mark detection problems. | ||
|
|
|
|
Test Labels | This option allows you to print test labels | ||
| one at a time. Press |
| to print the next |
|
| ||
| label. | ||
|
|
|
|
22 | PB50 Mobile Label and Receipt Printer User’s Guide |
