Intermec PRO 128 manual

Image 30

Intermec PRO 128 manual

Contents

PRO 128 Fishfinder Thank YOU Table of Contents Using the Tracker Unit HOW Sonar WorksHOW Sonar Works Feature Memory Simulator OperationSimulator Operation What YOU see ON-SCREEN What You See On-Screen Surface Clutter Rocky Bottom Soft Bottom Hard Bottom What YOU see on Screen Thermoclines. Thermoclines are sharp Control Functions ID+ adds an additional piece of informaControl Functions Al seconds until a continuous chirp is heard Menu Functions Menu Functions To the user Using the Tracker Unit Depth Range Right side of the display. Zoom can either operate User controls the location of the Zoom range Using the Tracker Unit Excess of 20 or less than 10 VDC cause the unit to power off Set, and Reset Black setting when powered off Available OFF and ON. The factory setting isOFF. With this setting, the Tracker unit dis Bottom Black. There are two selections Raw Sonar ID+ On Numeral Size settings are remembered when powered off Using the Diagnostic Feature Using the Diagnostic Feature Advanced Features Maintenance Maintenance and Warranty MAINTENANCE/TROUBLESHOOTINGTroubleshooting There is no transducer detected TroubleshootingNothing happens when I turn the unit on There is no bottom reading visible on the display Unit comes on before I press POWER, and won’t turn off Get gaps in the reading at high speeds TROUBLESHOOTING/WARRANTY My unit loses power at high speedsHumminbird ONE Year Full Warranty Warranty and Service Policy Service Policy Customer Support Transducer along with your unit when sending for repairCustomer Support Further information on Humminbird products can be found at Remove and use for Transducer Installation TOPPage Specifications