below the bottom of the screen, automatically moves up/down the current zoomed Fish Finder Display view and re-position the Variable Depth Marker (VDM) at the center of the screen.

NOTE Pressing [CLEAR] hides the Depth Cursor and if the Fish Finder is in Auto Range or Bottom Lock mode switches into Bottom Lock Zoom mode.

2.4INFO ON FISH FINDER: SYSTEM INFORMATION

If you want to know information about the Fish Finder connected, follow the procedure:

[MENU] + "SETUP" + [ENTER] + "SYSTEM INFORMATION" + [ENTER]

A window will be shown with the desired information on the Fish Finder Library row and on the Fish Finder module row.

Fig. 2.4 - System Information page

2.4.1 The System Update menu

The System Update menu allows downloading the Fish Finder firmware into the Fish Finder device. To select this menu follow the procedure:

[MENU] + "SETUP" + [ENTER] + "SYSTEM INFORMATION" + [ENTER] +

[MENU] + "Update BBFF Firmware" + [ENTER]

The current Fish Finder firmware version is shown in the System Update window that appears on the screen.

Insert the C-CARD with the firmware in one of the chart plotter available slots, and the press [ENTER] to update. Now select "YES" and press [ENTER] to confirm.

WARNING

Turn Off and after a few seconds turn On the 50-200 FISH FINDER in case of failed firmware upload.

18

User Manual

Page 16
Image 16
Interphase Tech U1-BBFF-DFN user manual Info on Fish Finder System Information, System Update menu