Invacare 1114831, 1121271, 1110266 Detail a, Outside, Front Rigging Inside Swingaway

5.Remove the lower footplate assembly from the front rigging support.

6.Squeeze and push the release button down to remove from the footplate tube.

7.Ensure the cam lock lever is UP and unlocked.

8.Insert the footplate tube into the front rigging support.

9.Position the lower footplate assembly to the desired height.

10.Align the adjustment holes in the front rigging support and footplate assembly.

11.From the outside of the swingaway front rigging, insert the riv nut through both the front rigging support and the footplate assembly.

12.From the inside of the swingaway front rigging, insert the button head screw through the appropriate adjustment hole and thread into the riv nut.

13.Using a screwdriver to hold the riv nut in position, securely tighten the button head screw. Torque to 32 in-lbs.

14.Push the cam lock lever DOWN to the locked position.

15.Reinstall the swingaway front rigging assembly. Refer to the owner’s manual that shipped with wheelchair.

16.Repeat this procedure for the other footplate, if necessary.

DETAIL "A"

	Front Rigging
	Support
	Release
Adjustment	Button
	Footplate
Holes
Cam Lock Lever	Assembly

NOTE: Swingaway footrest shown.

Front Rigging Support Riv Nut

Button Head Screw

Adjustment Hole

Front Rigging	Footplate Assembly
Support

OUTSIDE OF

Cam Lock LeverSWINGAWAY

FRONT

RIGGING

INSIDE OF

SWINGAWAY	Footplate Assembly
FRONT	NOTE: Swingaway
RIGGING	footrests shown.

FIGURE 1 - INSTALLING THE BOLT-IN-PLACE FRONT RIGGING KIT

Bolt-In-Place/Spring Button	2	Part No. 1114831
Front Rigging Kit