Removing/Installing Removable Leg Wedges
NOTE: For this procedure, refer to FIGURE 6.
NOTE: This procedure provides 1‐inch of lower seat to floor height on one side. This modification allows for easier foot propelling or the accommodation of some hip flexion limitations.
NOTE: This modification can be done on either side of the cushion.
1.Remove the cushion from the inner and outer covers. Refer to Removing/Installing the Cushion Covers on page 4.
2.Remove the leg wedge from the side of the cushion that requires a lower seat to floor height. Save the removable leg wedge for future use.
NOTE: Leg wedges secure in place with hook and loop strips.
3.Install cushion into inner and outer covers. Refer to Removing/Installing the Cushion Covers on page 4.
NOTE: This modification can be done on either side of the cushion.
Removable Leg Wedges
Top of cushion
Bottom of cushion Hook and Loop Strips
FIGURE 6 Removing/Installing Removable Leg Wedges
InTouch™ Stabilite/Stabilite OM Cushion | 8 | Part No 1141448 |
