Invacare 1141466 Attaching/Adjusting the Arm Tube, Adjusting the Angle or Tilt of the Walker Platform Attachment

Part No 1141466 3Walker Platform Attachment
Attaching/Adjusting the Arm Tube
NOTE:Forthisprocedure,refertoFIGURE2.
1. Loosenthearmtubeadjustmentknob,located
justbelowthearmpad.
2. Slidethearmtubeintotheslotunderneaththe
armpad.
3. Adjustthearmtubetothedesiredposition.
4. Securelytightenthearmtubeadjustment
knob.
FIGURE 2 Attaching/Adjusting the Arm Tube
Adjusting the Angle or Tilt of the Walker Platform Attachment
 WARNING
DO NOT apply full weight while adjusting the
angle or tilt - otherwise, injury may occur.
NOTE:Forthisprocedure,refertoFIGURE3.
Adjusting the Angle
NOTE:Thisadjustmentchangestheinwardor
outwardangleoftheuser’sarmtotheirtorsoonthe
horizontalplane.
1. Loosentheadjustmentknobsthatsecurethe
supporttubetotheU‐clamps.
2. Turnthesupporttubeuntildesiredangleis
obtained.
3. Securelytightentheadjustmentknobs.
Adjusting the Tilt
NOTE:Thisadjustmentchangesthetiltoftheuser’s
armtothefloorontheverticalplane.
1. Loosenthetiltadjustmentknob.
NOTE:Thetiltadjustmentknobislocatedwherethe
supporttubeconnectswiththearmsupport.
2. Liftuporpushdownonarmtubetoobtainthe
desiredtilt.
3. Securelytightenthetiltadjustmentknob.
FIGURE 3 Adjusting the Angle or Tilt of the Walker
Platform Attachment
Arm Tube
Adjustment
Knob
Arm Pad
Adjustment
Knobs
U-Clamps
Arm Pad
Support Tube
Arm Tube
Tilt Adjustment
Knob
Front of
Walker