7 SEAT AND ARMS
7.2Adjusting Seat Height
For this procedure, refer to FIGURE 7.2.
1.Remove the seat. Refer to Removing/Installing the Seat on page 33.
2.Pull up to remove the top shroud (Detail “A”) and expose the seat post and mounting hardware (Detail “B”).
3.Remove the mounting screw, two washers, locknut and cap that secure the seat post to the frame tube (Detail “C”).
4.Align the frame tube mounting hole with one of five seat post mounting holes to achieve desired seat height.
5.Install one washer onto the mounting screw.
6.Insert the mounting screw through the frame tube and seat post.
7.Install the remaining washer onto the mounting screw.
8.Install the locknut and cap onto the mounting screw to secure the seat post to the frame tube.
9.Install the top shroud (Detail “A”).
10.Install the seat. Refer to Removing/Installing the Seat on page 33.
Part No. 1163141 | 35 | Invacare® Leo™ Scooter |
